Belden 7953A 23/4P Cat6 DataTuff Cable F/UTP CMX-Outdoor PVC Black 1000 ft Reel

This DataTuff® cable is a high-performance 250 MHz Category 6 foiled unshielded twisted pair (F/UTP) cable, featuring four bonded pairs of 23 AWG solid bare copper conductors insulated with Polyolefin (PO), PVC inner jacket, overall Beldfoil® shield with a drain wire, patented X-Spline® separator, and a PVC outer jacket.

As a DataTuff cable, it is specifically engineered for maximum reliability in harsh industrial environments, offering superior resistance to sunlight and oil. Its rating of CMX-Outdoor makes it suitable for exposed outdoor installations, and carries the MSHA rating for mining applications.

Belden supplies this cable on a standard crate pay-off reel, meaning it’s wound on a rigid spool that you place on a reel stand or jacks so the cable can rotate and feed out smoothly and evenly as you pull it into place.

Applications

7953A is designed for outdoor, in cabinet with high volt devices, such as motor control center, mining, noisy environments, harsh environments, IIoT, factory or process automation, IP cameras and devices, data communication, PoE++, PoE+, PoE, etc. 

Construction

• 23 AWG solid bare copper conductors
• 4 bonded twisted pairs: white/blue stripe & blue, white/orange stripe & orange, white/green stripe & green, white/brown stripe & brown
• Polyolefin (PO) insulation
• PVC inner jacket with ripcord
• Overall Beldfoil® foil shield, 100% coverage
• 24 AWG (7x32) tinned copper drain wire
• Patented X-Spline® center membrane separator
• Black polyvinyl chloride (PVC) outer jacket 

Standards and Compliance

• Environmental Suitability: Indoor/Outdoor, Sunlight Resistance, Oil Resistance, Aerial
• Flammability / Fire Resistance: UL 1666 Riser, FT4, IEEE 1202 Vertical Tray Flame Test, IEC 60332-1-2
• CPR Compliance: CPR Euroclass: Eca; CPR UKCA Class: Eca
• NEC / UL Compliance: Article 800, CMR, CMX-Outdoor
• AWM Compliance: AWM 21047
• CEC / C(UL) Compliance: CMX-Outdoor, CMG
• IEEE Compliance: IEEE 802.3bt Type 1, Type 2, Type 3, Type 4
• NEMA Compliance: ANSI/NEMA WC-66
• Data Category: Category 6
• TIA/EIA Compliance: ANSI/TIA-568.2-D Category 6
• European Directive Compliance: EU CE Mark, EU Directive 2015/863/EU (RoHS 2 amendment), REACH, EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE), REACH: 2020-01-16
• UK Regulation Compliance: UKCA Mark
• APAC Compliance: China RoHS II (GB/T 26572-2011)

Click here for the Belden 7953A Technical Data Sheet .