Belden 29530 Multi-Conductor - 1000V UL Flexible Motor Supply Cable 2/0-3C TC XLPE/PVC VFD

This 2/0 AWG 3-conductor VFD motor supply tray cable (TC-ER, WTTC) features a 100% ground design with segmented bare grounds, making it a robust solution for variable frequency drive installations where superior grounding and noise control are critical.

Overall dual bare copper tape shields helically applied with 100% coverage for crack resistance and high frequency noise conduction.

The Exposed Run (TC-ER) rating means this cable meets crush and impact requirements, so it can be installed outside of a cable tray without continuous mechanical protection, unlike standard tray cables that must be enclosed in conduit, raceway, or similar protective systems.

Applications

29530 is designed for use as a variable frequency drive (VFD) cable, AC motor and drive system, Class I Division 2 hazardous locations, recommended cable gland Belden BTC150A1501RA

Construction

• 3 conductors, 2/0 AWG (7x19x20) tinned copper
• 3 segmented ground wire, 4 AWG (7x19x25) bare copper (3 totaling 2/0 AWG) 
• XLPE (cross-linked polyethylene) insulated conductors, black and numbered 
• Overall dual bare copper tape shield helically applied, 100% coverage
• Black PVC (polyvinyl chloride) outer jacket with ripcord

Standards and Compliance

• Environmental Suitability: Indoor, Outdoor, Sunlight Resistant, Burial
• Sustainability: CA Prop 65
• Flammability / Fire Resistance: UL 1685 UL Loading, FT4, IEEE 1202 FT4
• NEC / UL Compliance: Article 336, Type TC-ER, WTTC, XHHW-2, UL Flexible Motor Supply Cable
• CEC / C(UL) Compliance: TC
• ICEA Compliance: S-95-658
• European Directive Compliance: EU CE Mark; EU Directive 2015/863/EU (RoHS 2 amendment); EU Directive 2011/65/EU (RoHS II); EU Directive 2012/19/EU (WEEE)
• APAC Compliance: China RoHS II (GB/T 26572-2011)
• Other Compliance: P-07-KA070003-MSHA

Click here for the Belden 29530 Technical Data Sheet .