Belden 29511 Composite - 1000V UL Flexible Motor Supply Cable 14/4C + 16/1PR XLPO/PVC VFD

This 14 AWG 3-conductor VFD motor supply tray cable (TC-ER) features a 300% ground design with insulated pair and ground plus a tinned copper drain, making it a robust solution for variable frequency drive installations where superior grounding and noise control are critical.

Belden’s overall Beldfoil® + tinned copper braid shield combines 100% coverage with an 85% tinned copper braid, helping contain EMI and RFI while providing a low-impedance path to ground for improved VFD performance and reduced motor shaft voltage issues.

The Exposed Run (TC-ER) rating means this cable meets crush and impact requirements, so it can be installed outside of a cable tray without continuous mechanical protection, unlike standard tray cables that must be enclosed in conduit, raceway, or similar protective systems.

Applications

29511 is designed for use as a variable frequency drive (VFD) cable, AC motor and drive system, Class I Division 2 hazardous locations

Construction

• 3 conductors, 14 AWG (41x30) tinned copper
• 1 pair, 16 AWG (26x30) tinned copper, used as control or brake pair
• 14 AWG (41x30) PVC-insulated ground, green/yellow stripe
• XLPO (cross-linked polyolefin) insulated phase conductors, black and numbered 
• XLPO (cross-link polyolefin) insulated pair, black and white
• Bi-laminate (Aluminum/Poly) tape shield with pair, 100% coverage, foil-in, shorting fold
• 18 AWG (19x30) tinned copper drain wire with shielded pair
• Overall tri-laminate Beldfoil® (Aluminum/Poly/Aluminum) tape shield, 100% coverage
• 14 AWG (41x30) tinned copper drain wire with outer shield
• Tinned copper braid shield, approximately 85% coverage
• Black PVC (polyvinyl chloride) outer jacket with ripcord

Standards and Compliance

• Environmental Suitability: Indoor, Outdoor, Sunlight Resistant, Burial
• Sustainability: CA Prop 65
• Flammability / Fire Resistance: UL 1685 UL Loading, FT4, IEEE 1202 FT4
• NEC / UL Compliance: Article 336, Article 310, Type TC-ER, RHW-2, UL Flexible Motor Supply Cable
• AWM Compliance: AWM I/II A/B
• CEC / C(UL) Compliance: CIC, TC
• ICEA Compliance: S-95-658
• European Directive Compliance: EU CE Mark; EU Directive 2015/863/EU (RoHS 2 amendment); EU Directive 2011/65/EU (RoHS II); EU Directive 2012/19/EU (WEEE)
• APAC Compliance: China RoHS II (GB/T 26572-2011)
• Other Compliance: P-07-KA070003-MSHA

Click here for the Belden 29511 Technical Data Sheet .