Call 888-681-1768 | 8AM - 5PM ET M-F
Description
| CONSTRUCTION | |||||||||||||||||||||||||
| Conductor: | - Class B stranded soft drawn bare copper per ASTM B-3 & B-8 | ||||||||||||||||||||||||
| Insulation: | - Flame-retardant cross-linked polyethylene meeting the requirements for XHHW-2 per UL 44 and the requirements of ICEA S-66-524 for XLPE insulation as standard | ||||||||||||||||||||||||
| Ground Conductor: | - Stranded bare copper per UL 1277 | ||||||||||||||||||||||||
| Assembly: | - Conductors shall be cabled in concentric layers with interstices filled with suitable fillers where necessary. - The length of lay shall be per Table 9.1 of UL 1277 - A binder tape (when required) of synthetic material assembles the core in a tight circular configuration | ||||||||||||||||||||||||
| Color Code Chart: | 8 AWG - 750
10 AWG and 12 AWG
| ||||||||||||||||||||||||
| Jacket: | - Lead-free, flame-retardant, sunlight-resistant, Polyvinyl Chloride (PVC) | ||||||||||||||||||||||||
Applications:
- Used as power and control cables in dry and wet locations
- Can be installed in cable trays, raceways, and open air
- Suitable for exposure to weather, direct burial and for Class 1 Division 2 hazardous locations as per NEC
Standards:- Can be installed in cable trays, raceways, and open air
- Suitable for exposure to weather, direct burial and for Class 1 Division 2 hazardous locations as per NEC
- UL Type TC 600 Volt
- UL Type XHHW-2, VW-1 Conductors
- ICEA S-95-658/NEMA WC70
- ICEA T-29-520 (210,000 BTU/hr)
- IEEE 1202 (70,000 BTU/hr) / CSA FT4
- IEEE 383 (70,000 BTU/hr)
- UL Subject 1277 (70,000 BTU/hr)
- Meets cold bend test of -25*C per UL 1277 Section 15
- Type TC-ER on constructions greater than 2 conductors
- UL Type XHHW-2, VW-1 Conductors
- ICEA S-95-658/NEMA WC70
- ICEA T-29-520 (210,000 BTU/hr)
- IEEE 1202 (70,000 BTU/hr) / CSA FT4
- IEEE 383 (70,000 BTU/hr)
- UL Subject 1277 (70,000 BTU/hr)
- Meets cold bend test of -25*C per UL 1277 Section 15
- Type TC-ER on constructions greater than 2 conductors
