Call 888-681-1768 | 8AM - 5PM ET M-F
Description
This 4/0 AWG 3 conductor TECK 90 armored cable is a versatile power cable that is rugged, flexible, and meets the requirements for the Canadian Standards Association (CSA) to be used in hazardous locations. It is suitable for a broad range of industrial application environments and is often used in petrochemical, pulp, and paper industries.
Applications:
- In ventilated, non-ventilated and ladder cable trays
- In free air, raceways, and direct burial
- In wet, damp, or dry locations
- Approved for direct burial
- Class 1, Division 1 and 2; Class II, Division 1 and 2; and Class III industrial hazardous locations per NEC
Standards:
- UL 1581
- IEEE 1202
- Hazardous location rating - HL
- OSHA Acceptable
- -40C CSA cold impact and flame testing CSA FT 1 & FT 4
- CSA Standard C22.2 No. 131 and No. 174
Construction:
Conductor:
Stranded Class B bare copper per ASTM B3 and ASTM B8
Compact stranded to reduce cable diameter and weight
Colored stripes: red, black, blue
Insulation:
Cross Linked Polyethylene (XLPE) Type RW90
Assembly:
Cabled in concentric layers with grounding wire, interstices are filled with suitable nonhygroscopic fillers, as required A binder tape of synthetic material assembles the core in an essentailly round configuration, as required
Ground Wire:
One uninsulated 4 AWG stranded bare copper conductor
Inner Jacket:
Black, lead free, flame retardant, moisture, and sunlight resisitant Polyvinyl Chloride (PVC)
Armor:
Aluminum interlocked armor
Outer Jacket:
Black, lead free, flame retardant, moisture, and sunlight resisitant Polyvinyl Chloride (PVC)
Spec sheet available here.
