Description
This 2 AWG 3 conductor with ground UL MC shielded armored cable is a power cable that is rugged and has a high ranking for electrical properties. Rated at -35°C for cold bend and able to continuously operate at a conductor temperature of 105°C for normal operation, 140°C for emergency overload, and 250°C for short circuit conditions. It is suitable for a broad range of industrial application environments such as instrumentation, control, communication and power distributions.
Applications:
- Installed in wet or dry locations
- Indoors/outdoors and exposed or concealed work
- Cable trays or on approved support in protected areas
- Class I Division II, Class II Division II, and Class III Divisions I and II hazardous locations per the NEC
Standards:
- UL Type MV-105
- UL Type MC
- UL 1581
- UL 1072
- IEEE 1202
- OSHA acceptable
Construction:
Conductor:
Bare copper compact class B strand
Conductor Shield:
Extruded semi-conducting thermosetting stress control layer
Insulation:
Ethylene Polypropylene Rubber (EPR)
133% insulation level
Insulation Shield:
5 mil copper tape with 25% overlap
Assembly:
The insulated and shielded power conductors shall be cabled round with fillers and with a grounding conductor in one outer interstice and covered with a binder tape
Armor:
Single strip of aluminum interlocked armor
Outer Jacket:
Red, flame-retardant, moisture, and sunlight resistant Polyvinyl Chloride (PVC)
Spec sheet available here.