Description
This 16 AWG 9 conductor vinyl nylon tray cable (VNTC), also known as PVC/Nylon, is a general purpose 600 volt shielded control cable for use where shielding from electro-static interference is required in power, control and lighting circuits. It is suitable for a broad range of commercial and industrial uses.
The Exposed Run (ER) rating on this cable means it meets crush and impact testing requirements, and is therefore tough enough to run outside a cable tray without additional protection, unlike standard tray cables which must be installed inside a conduit, raceway or other protection.
Applications:
- In free air, raceways, and direct burial
- In wet or dry locations
- Approved for direct burial
- Class 1, Division 2 industrial hazardous locations per NEC
Standards:
- UL 1581
- UL 62 NEC Type TFFN conductors
- IEEE 1202
- RoHS compliant
- Rated for UV/sunlight resistance
- * UL 1277 Type TC-ER for 3 or more conductors
Construction:
Conductor:
Fully annealed stranded bare copper per ASTM B3
Class B stranding per ASTM B8
ICEA color code Method 1, Table E-2: black, red, blue, orange, yellow, brown, red w/black tracer, blue w/black tracer, orange w/black tracer
Insulation:
Flame-retardant PVC with clear polyamide (nylon)
Shield:
Aluminum/polymer tape providing 100% coverage
Drain Wire:
Stranded, tinned copper
Jacket:
Lead-free, flame-retardant, sunlight-resistant Polyvinyl Chloride (PVC) per UL standard 1277
Spec sheet available here.