16/19C VNTC Shielded Tray Cable E2 600V ER

This 16 AWG 19 conductor vinyl nylon tray cable (VNTC), also known as PVC/Nylon, is a general purpose 600 volt shielded control cable for use where shielding from electro-static interference is required in power, control and lighting circuits. It is suitable for a broad range of commercial and industrial uses.

The Exposed Run (ER) rating on this cable means it meets crush and impact testing requirements, and is therefore tough enough to run outside a cable tray without additional protection, unlike standard tray cables which must be installed inside a conduit, raceway or other protection.

Applications:

• In free air, raceways, and direct burial
• In wet or dry locations
• Approved for direct burial
• Class 1, Division 2 industrial hazardous locations per NEC

Standards:

• UL 1581
• UL 62 NEC Type TFFN conductors
• IEEE 1202
• RoHS compliant
• Rated for UV/sunlight resistance
• * UL 1277 Type TC-ER for 3 or more conductors

Construction:

Conductor:

Fully annealed stranded bare copper per ASTM B3

Class B stranding per ASTM B8

ICEA color code Method 1, Table E-2

Insulation:

Flame-retardant PVC with clear polyamide (nylon) 

Shield:

Aluminum/polymer tape providing 100% coverage

Drain Wire:

Stranded, tinned copper

Jacket:

Lead-free, flame-retardant, sunlight-resistant Polyvinyl Chloride (PVC) per UL standard 1277

Spec sheet available here.