Description

Flexible direct burial tray cable

CONSTRUCTION
Conductor:	- Bare, soft annealed copper per ASTM B-3 - 18 to 12 AWG (19 strand)
Insulation:	- Each conductor is concentrically insulated with a 15 mil wall of high dielectric flame retardant polymer with 5 mil wall of clear polymide (nylon) jacket extruded over primary insulation and conforming to UL requirements
Cabling:	- The applicable number of conductors are cabled together with fillers as necessary with a suitable layer - A clear mylar tape is helically applied over the core

Overall Jacket:	- Gas/vapor-tight heavy duty, flame and oil resistant neoprene (black) per UL-1277 and ICEA S-73-532 part 4

Applications:

- To be installed in trays, raceways, troughs, channels, ducts, conduit, and by direct burial
- Recommended for wet or dry locations and outdoors in cable trays where a sunlight resistant rating is required
- Designed for control, power, lighting, telemetering, signal, relay traffic control, wherever flexible, small diameter cable is required such as cranes, hoists, and some robotics applications
- Cables can be flexed at -40°C

Standards:

- OSHA acceptable
- Recognized for use in Class 1 or 2, Division 2 hazardous locations
- UL Type power and control tray cables and Articles 318, 340, 500, and 501 of the NEC
- Cables pass UL 1277 and IEEE 383 (70,000 BTU) flame tests
- Cables are rated 600 volts, 90°C dry and 75°C wet. UL file no. E60749

Specifications

AWG:

Color:

Black

Number of Conductors:

Conductor type:

STR BARE CU

CSA:

YES

Insulation:

POLYMER/NYLON

Jacket type:

NEOPRENE

Outside Diameter:

0.38

Putup:

REEL

Shield 1 type:

NONE

Temperature:

90 DEGREES CENTIGRADE (194 F)

UL:

YES

Voltage rating:

600V

Weight per Foot:

0.11500

Manufacturer Equivalents

Omni Cable item:

AS11203

Southwire item:

569937