10/9C VNTC N/S Tray Cable E2 600V ER

This 10 AWG 9 conductor vinyl nylon tray cable (VNTC), also known as PVC/Nylon, is a general purpose 600 volt non shielded control cable designed for power, control and lighting circuits. It is suitable for a broad range of commercial and industrial uses.

The Exposed Run (ER) rating on this cable means it meets crush and impact testing requirements, and is therefore tough enough to run outside a cable tray without additional protection, unlike standard tray cables which must be installed inside a conduit, raceway or other protection.

Applications:

• In free air, raceways, and direct burial
• In wet or dry locations
• Approved for direct burial
• Class 1, Division 2 industrial hazardous locations per NEC

Standards:

• UL 83 NEC Type THHN/THWN conductors
• IEEE 1202
• OSHA acceptable
• Rated for UV/sunlight resistance
• * UL 1277 Type TC-ER for 3 or more conductors

Construction:

Conductor:

Fully annealed stranded bare copper per ASTM B3

Class B stranding per ASTM B8

ICEA color code Method 1, Table E-2: black, red, blue, orange, yellow, brown, red w/black tracer, blue w/black tracer, orange w/black tracer

Insulation:

Flame-retardant PVC with clear polyamide (nylon) per UL standard 83 for type THHN/THWN wire

Jacket:

Lead-free, flame-retardant, sunlight-resistant Polyvinyl Chloride (PVC) per UL standard 1277 

Spec sheet available here.