10/4C XLPE/CCW/PVC UL MC-HL Armored Cable w/G 90C 600V

This 10 AWG 4 conductor UL MC-HL armored cable is a power cable that is rugged and has a long term cable performance. CCW (Continuously Corrugated Welded) construction has an aluminum strip formed into a circle lengthwise and then welded at the seam. To prevent twisting while bending the tube is then grooved to add ridges. CCW creates an impermeable seal against moisture and other chemicals. It is suitable for a broad range of industrial application environments such as instrumentation, control, communication and power distributions, as well as offering electromagnectic benefits.

Applications:

• Use on power or control circuits
• Installed in a cable tray, wire ways, racks, or buried directly
• Suitable for exposure to hazardous locations
• Type MC-HL for Classes I, II, and III Division I and II

Standards:

• UL 44
• XHHW-2
• UL 1569 Type MC
• UL 2225 Type MC-HL
• UL 1309 Marine Shipboard
• UL 1581
• IEEE 1202 available upon request

Construction:

Conductor:

Bare annealed copper per ASTM B-3

Compressed Class B stranding per ASTM B8

ICEA color code M1-E2: black, red, blue, orange

Insulation:

Cross Linked Polyethylene (XLPE) type XHHW-2 per UL 44

Grounding Conductor:

Class B stranded bare copper per ASTM B3 and B8

Cross Linked Polyethylene (XLPE) insulation

Green and sized in accordance with NEC Table 250.122

Armor:

Impervious, continuously welded and corrugated aluminum alloy sheath per UL 1569 and UL 2225

Meets grounding requirements of NEC article 250

Outer Jacket:

Black Polyvinyl Chloride (PVC), sunlight and oil resistant, per UL 1569, 90°C temperature rating

Spec sheet available here.