1/0-3C TECK90 Armored Cable w/G 90C 1KV

This 1/0 AWG 3 conductor TECK 90 armored cable is a versatile power cable that is rugged, flexible, and meets the requirements for the Canadian Standards Association (CSA) to be used in hazardous locations. It is suitable for a broad range of industrial application environments and is often used in petrochemical, pulp, and paper industries.

Applications:

• In ventilated, non-ventilated and ladder cable trays
• In free air, raceways, and direct burial
• In wet, damp, or dry locations
• Approved for direct burial
• Class 1, Division 1 and 2; Class II, Division 1 and 2; and Class III industrial hazardous locations per NEC

Standards:

• UL 1581
• IEEE 1202
• Hazardous location rating - HL
• OSHA Acceptable
• -40C CSA cold impact and flame testing CSA FT 1 & FT 4
• CSA Standard C22.2 No. 131 and No. 174

Construction:

Conductor:

Stranded Class B bare copper per ASTM B3 and ASTM B8

Compact stranded to reduce cable diameter and weight

Colored stripes: red, black, blue

Insulation:

Cross Linked Polyethylene (XLPE) Type RW90

Assembly:

Cabled in concentric layers with grounding wire, interstices are filled with suitable nonhygroscopic fillers, as required A binder tape of synthetic material assembles the core in an essentailly round configuration, as required

Ground Wire:

One uninsulated 6 AWG stranded bare copper conductor 

Inner Jacket:

Black, lead free, flame retardant, moisture, and sunlight resisitant Polyvinyl Chloride (PVC)

Armor:

Aluminum interlocked armor

Outer Jacket:

Black, lead free, flame retardant, moisture, and sunlight resisitant Polyvinyl Chloride (PVC)

Spec sheet available here.